Broadworks Setting up new TN in AS and Adtran for Analog line

Setting up new numbers in AS and Adtran for Analog line

Add TN in AS for Service Providers
Navigate to System > SPID
Choose Service Provider (SPID-120 is for local Phoenix)
Click Resources on far left then Numbers on mid right
Add/Remove/Edit Numbers in window
end

Add TN in AS for Service Providers/Group
Navigate to System > SPID > Group
Resources left. Assign Numbers right. Click Add in top row.
Add number so it is in Assigned to Group box on far right
end

Add TN in AS for Service Providers/Group/Users
Click Addresses in middle
Use phone number drop down select in window
end

Adding new TN for a Trunk Group (Business only)
Navigate to System > SPID > Group
Click Services left. Click Trunk Group on right
Click Edit on name of Trunk
Click Profile on far left and the Profile on mid right
Scroll to bottom and click Search
Scroll to bottom and click Edit on name/number you want to edit
Click Profile on far left then Addresses on mid right
Use phone number drop down select in window for change
end


Setting up TN in AS for FXS use in Adtran
Get Tn ready in AS for a non Trunk type number
    1. System > Service Provider > Groups > Group Name > Edit
    2. Click Users, search, then click on phone number.
    3. Click Profile on far left then Addresses mid right
    4. select TN from Phone Number drop down
    5. Select radio button Identity/Device Profile
    6. Select your device from  Identity/Device Profile Name
Set auth name and password for the TN from AS for use in Adtran
    1. System > Service Provider > Groups > Group Name >
    2. Click Profile far left then Users, search, then click on phone number.
    3. Click Utilities on far left then Authentication
    4. Authentication User Name: Set to user name (authnamehere)
    5. Password set: what you want (123456)
DO NOT register number under SIP Voice Trunk In Adtran settings. You reg this under the FXS voice user. see below.
In Adtran cli
    (copnfig)# voice user 6020000000                                 //6020000000 is replaced your number that you will use//
    (config-6020000000)# connect fxs 0/1                            //enter the fxs port you want to use//
    (config-6020000000)# password "1234"                            //enter 4 char password here//
    (config-6020000000)# description "Analog Line 6020000000"        //6020000000 is replaced your number that you will use
    (config-6020000000)# sip-identity 6020000000 T01 register auth-name "authnamehere" password "123456" //get auth-name from AS//
    (config-6020000000)# sip-authentication password "123456"