Centos 6.6 create bridged network
I am using network 192.168.10.0/24 with my gateway of 192.168.10.1 and DNS of 192.168.10.1
I have my Centos server with IP Addr of 192.168.10.100
I am using this bridge for my KVM quest images so they can be on the same network. They will use the br0 interface when setting them up
# chkconfig NetworkManager off
# service NetworkManager stop
# vi /etc/resolv.conf
search whittenberg.domain
nameserver 192.168.10.1
# vi /etc/networks
default 0.0.0.0
loopback 127.0.0.0
link-local 169.254.0.0
# vi /etc/sysconfig/network
NETWORKING=yes
HOSTNAME=nas
GATEWAY=192.168.10.1
NETWORKING_IPV6=no
# vi /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE=eth0
HWADDR=74:d4:35:ea:90:1f
ONBOOT=yes
TYPE=Ethernet
UUID=a949b417-3f11-4e60-821d-20467047c8dc
BOOTPROTO=none
NETWORKING_IPV6=no
IPV6_AUTOCONF=no
#IPADDR=192.168.10.100
#NETMASK=255.255.255.0
#BROADCAST=192.168.10.255
#NETWORK=192.168.10.0
#GATEWAY=192.168.10.1
BRIDGE=br0
# vi /etc/sysconfig/network-scripts/ifcfg-br0
DEVICE=br0
TYPE=Bridge
ONBOOT=yes
BOOTPROTO=static
NETWORKING_IPV6=no
IPV6_AUTOCONF=no
STP=yes
DELAY=0
IPADDR=192.168.10.100
NETMASK=255.255.255.0
BROADCAST=192.168.10.255
NETWORK=192.168.10.0
GATEWAY=192.168.10.1
# service network restart
# ifconfig
br0 Link encap:Ethernet HWaddr 74:D4:35:EA:90:1F
inet addr:192.168.10.100 Bcast:192.168.10.255 Mask:255.255.255.0
inet6 addr: fe80::76d4:35ff:feea:901f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:562054 errors:0 dropped:0 overruns:0 frame:0
TX packets:422603 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3401299937 (3.1 GiB) TX bytes:42579134 (40.6 MiB)
eth0 Link encap:Ethernet HWaddr 74:D4:35:EA:90:1F
inet6 addr: fe80::76d4:35ff:feea:901f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:3402344 errors:0 dropped:94 overruns:0 frame:0
TX packets:979938 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4841659591 (4.5 GiB) TX bytes:93819012 (89.4 MiB)
Interrupt:18
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:65536 Metric:1
RX packets:460893 errors:0 dropped:0 overruns:0 frame:0
TX packets:460893 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:6962540755 (6.4 GiB) TX bytes:6962540755 (6.4 GiB)
vnet0 Link encap:Ethernet HWaddr FE:54:00:96:F2:2F
inet6 addr: fe80::fc54:ff:fe96:f22f/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:205365 errors:0 dropped:0 overruns:0 frame:0
TX packets:244950 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:500
RX bytes:15677097 (14.9 MiB) TX bytes:324471587 (309.4 MiB)
# brctl show
bridge name bridge id STP enabled interfaces
br0 8000.74d435ea901f yes eth0
Thanks for sharing your experienced about Broadsoft services providers.
ReplyDeleteBroadsoft Service Providers